Dan-dugan-sound-design E-1 Manual de usuario descargar pdf (Pagina 33)

Dugan Models E-1 and E-1A User Guide Dugan Control Panel

Bypass

When bypass is active, the signal passes through without automixing. That channel

appears inactive, with all lights extinguished.

Figure 4-4 bypass button lit

Since all analog I/O is bypassed when the power is off, it is not necessary to unpatch

the Model E-1A when not in use.

If you are using analog I/O, bypass mode physically connects the input to the output

with a relay. Channels are automatically bypassed when the power is off. In

man

mode, the signal undergoes an A/D and D/A conversion, with the specified latency,

but no automixing.

Man and bypass modes are the same except for the transition. Bypass is instantaneous,

which can cause an audible click, while

man performs a quick fade without sonic ar-

tifacts.

To deactivate bypass, you can:

• Click bypass again;

-OR-

• Click any of the three channel mode buttons.

Channel Modes

There are three channel modes: man, auto, and mute. Changing modes initiates a half-

second fade to the new mode. Like radio buttons, you can only choose one mode at

a time.

Figure 4-5 Channel modes

1 2 ... 28 29 30 31 32 33 34 35 36 37 38 ... 51 52

Sin comentarios

Dan-dugan-sound-design E-1 Manual de usuario Pagina 33